• 11/04/2014

    CFRP components for BMW Series i3 and i8 produced by Benteler SGL with Cannon equipment

BMW i8 with cannon Bentler

Benteler SGL selected Cannon as equipment partner for the production of new, innovative Carbon-reinforced parts supplied to BMW for new series of BMW i8 and i3.

Benteler Automobiltechnik GmbH (www.benteler.com), with more than 24.000 employees worldwide in 20 development and sales offices and 70 factories in 29 countries, develops and produces ready-to-install modules, components, and parts for body, chassis, and engine. The joint venture Benteler-SGL Automotive Composites develops, produces, and markets components based on Carbon Fiber-Reinforced Polymers (CFRP) for the automotive industry.
Among their numerous references stand the new BMW i8 and i3 Series models that utilise a total of more than ten components manufactured by the Ried-based company in their new production plant.
 
Cannon Deutschland, in cooperation with Cannon Ergos, has supplied the turn-key installation required for this important contract. The fully-automatic production plant supplied by Cannon to Benteler SGL includes:
  • one high-pressure dosing unit Cannon ESTRIM for the Epoxy resin application process,
  • according to the Cannon LLD (Liquid Lay Down) distribution method;
  • two 1,000 ton presses for the fast polymerisation of parts;
  • five handling robots for the manipulation of Carbon fibres and finished parts;
  • the whole set of electronic controls, safety devices and the storage facilities for chemicals.
The LLD distribution method used for this plant consists in deposing a liquid “ribbon” of formulated resin over the Carbon fibre reinforcement. The sandwich of various layers of Carbon fibres is therefore wetted with a uniform film of liquid that will perfectly impregnate its entire surface once pressed in the mould. The absence of in-mould flow of reacting resin coming from the mixing head reduces drastically the counter-pressure generated during injection, allowing for the use of low-tonnage clamping presses. This reflects into a limited investment in moulds and clamping tools and in a limited consumption of energy during each cycle, thus contributing to reduce production costs.
The high-pressure impingement mixing heads used for the ESTRIM technology allow for the use of fast-reacting formulations, able to generate parts which can be demoulded after only three minutes, a part-to-part cycle time very much appreciated by the automotive industry suppliers.
 
A peculiar aspect of the supply consists in the possibility of using recycled Carbon fibres, obtained from scraps generated by the preforming and trimming operations performed in the same plant or from other CFRP production units. A substantial saving in fibres cost can be achieved with the use of recycled reinforcement, as well as the solution of a major environmental and disposal problem.

 

  • The Cannon-Sandretto Plastics Collection Re-opens!

    01/01/1970

    Re-opening of Sandretto Plastics Collection Museum

    Closed for some time for a substantial restoration, the Cannon – Sandretto Plastics Collection re-opened in Pont Canavese, near Turin, Italy on Sunday, June 7, 2015. Hundreds of antique plastic objects are again displayed in seven refurbished rooms.

  • Cannon Artes Ingegneria and Teheran's gold-rush

    17/04/2015

    CANNON ARTES ON "LA REPUBBLICA A&F"

    Alessio Liati, sales manager director of Cannon Artes Ingegneria, talks about the commercial importance of Iran for Italian companies on the Italian newspaper LA REPUBBLICA - AFFARI & FINANZA 13/04/15.

  • Vacuum-Assisted Technology: now also for existing plants!

    26/11/2014

    A new retrofitting kit allows the manufacture of discontinuous insulated panels making use of existing presses and foaming plants.
    Energy-efficient elements of the Cold Chain (refrigerated warehouses, reefer containers, cold rooms, commercial and domestic refrigerators, portable coolers etc.) have proven their effectiveness in reducing the use of energy required to keep our food fresh in its path from “field to table”.

  • The modernization of EDF Le Havre power plant is ongoing: BONO ENERGIA’s boilers are on site!

    04/02/2014

    The EDF project to modernize Le Havre site includes the installation of two BONO ENERGIA auxiliary boilers. On 23 and 24 September, boilers arrived on site and have been placed by a 1250 tonnes crane.